How To Reconnect Zmodo Camera To New Wifi

If your Zmodo camera won't connect to WiFi, then follow this guide to fix the outcome rapidly. You need to ready this problem as before long as possible because the Zmodo camera needs WiFi to get the live stream, move detection, and other phone alerts.

To prepare a Zmodo camera non connecting to WiFi, you should make sure the WiFi connection works and meets all the requirements. Most of the time, the issue is related to the frequency that the camera is using, more specifically the router's WiFi may be operating at ii.4Ghz and 5Ghz and the camera is trying to connect to the wrong SSID.

In other words, the photographic camera is operating on 2.4Ghz frequency but it's connecting to the 5Ghz SSID (which is the wireless name). Follow the troubleshooting tips below to fix the issue.

Zmodo camera tin't connect to the internet (WiFi)

In ninety% of the cases, this problem with the Zmodo camera happens if y'all are using a dual-band router. That means the router offers two WiFi signals, two.4Ghz, and 5Ghz. Your photographic camera may only exist able to connect to 2.4Ghz and not 5Ghz (or vice versa), and so information technology can get stuck attempting to connect to both frequencies of your dual-band router.

To gear up the result of the Zmodo camera non connecting to the internet but rename the separate SSDI's (WiFi proper name) and so y'all can differentiate between them. Follow the steps.

• Access your router settings (usually by typing the IP address of the router on the web browser and log in with your username/password).
• Locate the WiFi menu.
• If your router is dual-band, you should run across two WiFi names in that location (one is 2.4Ghz, the other one is 5Ghz). Rename each of the SSID using different names. For example, rename the beginning one "MyWiFi2.4" and the other 1 "MyWiFi5".
• Save the settings. Additionally, make sure your router is using the WPA or WPA2 for the encryption style.

Let's assume that y'all have a Zmodo camera that works on 2.4Ghz but. Since we renamed both WiFi names of the router, you tin connect the camera direct to the 2.4Ghz bespeak which above we renamed as "MyWiFi2.4". Connect to it and the camera will outset to work, no more failed connection.

Zmodo camera doesn't take the WiFi password

Here's an issue with some of the Zmodo cameras: they don't take WiFi passwords that are more than 13 characters long. Permit's say your WiFi password contains 20 characters, if you enter it on the Zmodo camera app, it won't connect.

Information technology's a weird issue but it happens. The newer Zmodo models accept this trouble fixed, just not some of their camera models. There's no prepare for this, all you accept to exercise is to alter the password of your WiFi and employ one that contains less than 13 characters.

Troubleshoot the WiFi setup (of Zmodo cameras)

Cheque if the WiFi indicate is working in the first place. Peradventure the camera can't connect considering the WiFi doesn't piece of work at all. Try to connect to the WiFi using your phone, or a estimator, or whatever other device just to ensure that the net works.

If it seems that the other devices connect fine to the internet, and so reboot the router and try again. Sometimes rebooting a device tin do wonders.

Next check the WiFi strength, the signal must exist potent to cover your Zmodo camera. At the same time, make sure the camera is non far abroad from the router and that information technology's inside the nominal coverage. You tin bring the photographic camera closer simply to see if it connects.

A few tips on how to check the WiFi point force:

• Check the WiFi symbol on your phone or tablet, it'due south displayed on the corner of the screen, and brand sure all the confined are filled. The more bars, the stronger the cyberspace.
• Download apps as NetSpot, WiFi Analyzer, or Wireshark to test out the WiFi signal's strength.

For some smartphones, you lot volition demand to disable your 3G/4G LTE data connection during setup. One time yous have configured your device, you can re-enable your 3G/4G LTE data connection.

If the Status Light is blinking light-green on the camera, try removing special characters and spaces from the SSID (WiFi network name) like "?" or "!". Likewise, make sure the app and the camera are updated to the latest firmware versions.

If the WiFi is okay but you're even so having issues, follow the steps below to troubleshoot your router for the SmartLink setup.

• Access your wireless router settings.
• Find the tab or settings for the Wireless.
• Find the option chosen Wireless Network Way.
• Fix the wireless network mode of your 2.4GHz wireless network to 802.11b only, 802.11g but, or 802.11b/g only.
• Retry the SmartLink setup (or any Zmodo phone app that you're using) from your smartphone while connecting to this network.
• Later the phone app successfully connects your wireless device to the WiFi network, you can change your settings back to their original value. The wireless device volition automatically connect to your network.

Conclusion

Zmodo photographic camera not connecting to the WiFi is most of the time related to dual-band routers and yous need to rename the WiFi names for 2.4Ghz and 5Ghz. That way the camera will differentiate both signals and right them to the right i. Leave a annotate if you can't solve the problem, or contact the manufacturer.

Source: https://securitycamcenter.com/zmodo-wont-connect-to-wifi-fix/

Posted by: valdeztherplis.blogspot.com

Share this post