How To Lubracata Apentax Me Camera

Originally posted by stevebrot

Before you started playing with lube, you may want to cheque the condition of the mirror damper cream (at front edge of focus screen to provide a landing pad at the leading edge of the mirror). If it is sticky, it can ho-hum mirror return. You lot volition also want to bank check the status of the foam light seals around the film door. Use a toothpick or fine woods splint to determine if they are viscous, hardened, or crumbly.

Replacement of the foams is role of a standard CLA (

C

lean,

Fifty

ube,

A

djust) as is lubrication and diagnosis of bug. A CLA volition likely price well-nigh what you paid for the camera. You tin can also replace the foams yourself. I strongly recommend the kit sold by Jon Goodman. Should yous opt to attempt the repair/lube yourself, hither are a few links:

Pentax ME Super Service Manual at pentax-manuals.com (Document countersign is "Pentax".)

Micro-Tools (photographic camera repair tools and supplies)
This i is particularly of import since the cross-point screws used are Not Phillips caput. They are JIS and require appropriate JIS screwdrivers.

Skilful luck!

Steve

Many thanks, Steve, for your very wise recommendations. Indeed I have checked the seals and they seem fine. The upper foam where the mirror hits inside the lightbox is likewise in good status and the mirror return is not a problem at all. Nevertheless, the problem occurs as following: when I printing the shutter, there is a brusque withal noticeable lag before the mirror goes up. The shutter works properly and the speeds seem correct too. After that, the mirror returns to its position with no problem. If I shoot again, there is no lag at all. The lag but occurs later the camera is idle for i h or more. The problem is the mirror going upwards, not going down. Some users have pointed out a lub effect. Do you have any idea about this?

The camera seems overall in adept condition, except for this mirror affair and as well for the back door, which seems to prove some wobble when it is closed. It is a 1mm movement which makes me think that some calorie-free could go admission within the motion picture box. I know that I should cheque it with a motion-picture show and see by myself. Did you always meet something like this before? any ideas to ready it?

Source: https://www.pentaxforums.com/forums/58-troubleshooting-beginner-help/211174-me-super-slow-mirror-reflex.html

Posted by: valdeztherplis.blogspot.com

Share this post